Checking The Drive Shaft; Installing The Final Drive Assembly - Yamaha VMX12 2001 Service Manual

SHAFT DRIVE
EAS00727

CHECKING THE DRIVE SHAFT

1. Check:
• drive shaft splines
Damage/wear → Replace the drive shaft.
EAS00728

INSTALLING THE FINAL DRIVE ASSEMBLY

1. Lubricate:
• drive shaft splines
Recommended lubricant
Molybdenum disulfide grease
2. Install:
• final drive assembly
NOTE:
@
Align the drive shaft splines with the driven
yoke of the universal joint.
@
3. Tighten:
• final drive assembly nuts
NOTE:
Apply locking agent (LOCTITE
of the final gear assembly nuts.
4. Install:
• rear shock absorber (left)
Refer to "REAR SHOCK ABSORBER".
• rear wheel
Refer to "REAR WHEEL AND BRAKE
DISC".
5. Fill:
• final drive assembly
Refer to "CHECKING THE FINAL DRIVE
OIL LEVEL" in chapter 3.
7 - 113
CHAS
42 Nm (4.2 m · kg)
®
) to the threads