Connecting Devices; Supplying Power On The Tek-Cpci-1000 - Teknor Industrial Computers TEK-CPCI-1000 Technical Reference Manual

7. CONNECTING DEVICES

7.1

SUPPLYING POWER ON THE TEK-CPCI-1000

All voltages required to supply the TEK-CPCI-1000 board must be provided by the
backplane, through the rear-panel PCI connector (J11, J13).
The pin assignation for the different voltages appears as follows:
+5V (VCC)
+12V
GND
For more information please refer to Section D – Connector Pinouts.
A1, A25, B2, B24, D3, D23, F1, F25
D1
B4, B6, B8, B10, B16, B18, B20, B22, B26, B28, B30,
B32, B34, B36, B38, B40, D5, D7, D9, D11, D15, D17,
D19, D29, D31, D33, D35, D37, D39, D41, B42
7-1