Table of Contents
Advertisement
6. INSTALLING AND WORKING WITH SYSTEM
COMPONENTS
6.1
PROCESSOR AND FAN
The processor and its cooling system are is installed according to the user configuration.
A +12V DC voltage is available through the J18 connector to supply the fan (the
connector's pinout appears in Appendix-C).
Installing Microprocessor
C oo ling
Fa n
H ea t
S in k
P ro ces sor
Six jumpers are related to the processor:
W1
W1A-W4-W10
W8-W15
W16
W17-W18
A fan is required when working with the PCI-934
board.
A +12V voltage is available through the J8
connector to supply the fan (The connector's
Fa n
pinout appears in Appendix-C).
P ow er
C ord
Please refer to your processor specifications for
more information.
When installing a processor, its type, core
voltage, clock speed multiplier, and Core/Bus
Fa n
ratio value must be configured according to your
C on nec to r
(Po w er)
CPU model.
Selects the core voltage (Vcore).
Defines the Core/Bus clock ratio.
Defines the CPU bus clock.
Determines the DRAM refresh rate.
Selects the CPU type within split-plane or single-plane.
6-1
Advertisement
Table of Contents
