Panel Cutting Dimension - Mitsubishi Electric GOT1000 Series Handbook

Compatibility with existing product
Project data
(1) Compatibility when changing from GT Designer to GT Designer2 *
The project data created with GT Designer is available for GT Designer2.
(2) Compatibility when changing GOT900 series to GOT1000 series *
• Using data of GOT-A900 series in GOT1000 series
The project data for GOT900 series is available for GOT1000 series.
• Using data of GOT-F900 series in GOT1000 series
The project data for GOT-F900 series is available for GOT1000 series.
For details, refer to "Project Data Conversion Summary (JY997D17601A)".
*: Some data and functions are not available.
Cable
• For the details of using the GOT900 series bus connection cables, RS-422 cables and RS-232 cables
with the GOT1000 series, see TECHNICAL BULLETIN No.GOT-A-0009.
• The bus connection cables, RS-422 cables and RS-232 cables for the GOT1000 series cannot be
used for the GOT900 series.

Panel cutting dimension

(1) Compatibility when changing GOT900 series to GOT1000 series
• The panel cutting dimension is the same between A985GOT(-V) and GT1585, between A975/
970GOT(-B) and GT157
hole is not required.
• The panel cutting dimension is different between A95
GT115 -Q
hole.
When using multi-channel function with GT16 or GT15
The multi-channel function monitors multiple FA devices with mounting multiple communication units on a
GOT or using the standard interface.
Available combinations of connection types
(1) GT16
For GT16, the combinations of the bus or network connection, the Ethernet connection, and the
serial connection are available as shown in the following table.
Bus / network connection
• Bus connection
• MELSECNET/H connection (programmable controller
to programmable controller network)
• MELSECNET/10 connection (programmable controller
to programmable controller network)
• CC-Link IE controller network connection
• CC-Link connection (intelligent device station)
• CNC connection (MELSECNET/10 connection
(programmable controller to programmable controller
network), CC-Link connection (intelligent device
station))
, and F940GOT and GT155
BDA. However, the GOTs can be exchanged without changing the mounting
/GT115
and GT155
Ethernet connection
• Ethernet connection
• Third party programmable
controller connection (Ethernet
connection)
• MODBUS /TCP connection
• Robot controller connection
• CNC connection (Ethernet
connection)
3.2 Precautions for Use
. Changing the mounting
/GT115 -Q BDQ or
Serial connection
• Direct CPU connection
• Computer link connection
• CC-Link connection (via G4)
• Third party programmable
controller connection (serial
connection)
• Microcomputer connection
• Temperature controller
connection
• Inverter connection
• Servo amplifier connection
• CNC connection (serial
connection)
45
1
2
3
4
5
6
7