Mitsubishi Electric GOT1000 Series Handbook page 53

*4 For using the SFC monitor function, a capacity of 6201KB or more is required in the user area of the specified
drive for installing the extended function OS and option OS. (For using the GOT with the built-in flash
memory of 5MB, set the OS boot drive to [A: Standard CF Card].)
For operating GOT Function Expansion Library (option OS), a capacity of 8192KB is required in the user area
of the GOT memory. (A total memory capacity of 14393KB is required for using the SFC monitor function.)
Therefore, the following settings are required depending on the GOT to be used.
GT1575-VN,
GT1562-VN
Other than the above
For setting the OS boot drive, refer to the following.
GT Designer2 Version
For GT11
Function name
Bar code
Extended
RFID
function
System monitor
Recipe
Optional
A list editor
function
FX list editor
*1 Not available for GT1155-QTBDQ, GT1155-QSBDQ and GT1150-QLBDQ.
*2 Not available for GT1155-QTBDQ, GT1155-QTBDA, GT1155-QSBDQ, GT1155-QSBDA, GT1150-QLBDQ
and GT1150-QLBDA.
For GT10
Function name
Bar code
Optional
Recipe
function
FX list editor
*1 Inapplicable to the GT1030 and GT1020.
GOT
GT1572-VN, • Setting the OS boot drive to
• Memory expansion (Installing an option function board with add-on memory)
• Memory expansion (Installing an option function board with add-on memory)
Basic Operation/Data Transfer Manual (Chapter 8 TRANSFERRING DATA)
Extended function OS/Option OS
Bar code
RFID
System monitor
Recipe
*1
MELSEC-A list editor
*2
MELSEC-FX list editor
Extended function OS/Option OS
Not required
Not required
*1
Not required
Required setting
[A: Standard CF Card]
: Required : Disabled
Option function board
OS capacity
(User area)
GT11-50FNB
Not required
Not required
Not required
0KB
OS capacity
Option function board
(User area)
- Not required
- Not required
- Not required
3.2 Precautions for Use
1
2
3
4
5
6
7
35