Precautions on system
Clock setting of GOT
The indicating controller does not have the clock function. Even though [Adjust] or [Broadcast] is set for
the clock setting, the setting is invalid (not processed).
Setting station No. of indicating controller
Make sure that the indicating controller corresponding to the station No. set for the host address exists in
the system configuration.
• For details of system configuration and
• For precautions and restrictions
• For outlined procedure and checking of SHINKO
indicating controller connection
• For controllers that can be monitored by GOT and
• For connection method with Handy GOT
For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
Chapter 31 in GOT1000 Series Connection Manual
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 29 in Handy GOT User's Manual
4.6 Temperature Controller
4.6.3 SHINKO indicating controller