Download  Print this page

Mitsubishi Electric GOT1000 Series Handbook Page 55

Graphic operation terminal.
Hide thumbs

Advertisement

(2) Selecting by user area size (drive space required for data transfer)
The GOT operates by expanding the OS or Project data stored in the built-in flash memory
(ROM) to the user memory (RAM).
For the GT16, since a part of the data is compressed to be stored in the built-in flash memory
(ROM), the data size becomes larger when it is expanded to the user memory (RAM).
Boot OS, Standard monitor OS, Communication driver, Extended function OS, Option OS,
Special data, Project data and other data resides on the system area and user area of the drive
specified by the GOT.
Regarding Boot OS, Standard monitor OS and first communication driver on the GT15 that
reside on the system area of the C drive, it is not necessary to check the data capacity before
installation.
However, when the GT16 or GT15 is used, for extended function OS, option function,
communication driver (the second or later communication driver for the GT15) and project data
that reside on the user area, data will not be transferred if there is insufficient space on the
target drive.
When performing data transfer (OS installation, project data download), confirm the amount of
space available on the specified drive's user area and the amount of data to be transferred.
User area size
Transfer destination
Drive C
(C: Built-in Flash memory)
Drive A
(A: Standard CF Card)
Drive B
(B: Extended Memory
Drive E
(E: USB memory)
Drive C
(C: Built-in Flash memory)
Drive A
(A: Standard CF Card)
Drive B
(B: Extended Memory
Card)
Drive C
(C: Built-in Flash memory)
Drive C
(C: Built-in Flash memory)
Drive C
(C: Built-in Flash memory)
Drive C
(C: Built-in Flash memory)
User area size
15MB
Check the CF Card capacity.
Check the CF Card capacity.
Check the USB memory capacity.
GT1595-X,
GT1585V-S
GT1585-S,
GT1575V-S
GT1575-V,
GT1565-V
9MB
GT1555-V
GT1555-Q,
GT1550-Q
GT1575-VN,
GT1572-VN
5MB
GT1562-VN
Check the memory size of CF card.
Check the memory size of CF card.
3MB
3MB
GT105
GT1030
1.5MB
GT1020
512KB
Remarks
The total memory size of Extended function OS, Option
OS, Special data, and Communication driver must be
smaller than the user area capacity.
Download (store) the Project data to Drive A (A: Standard
CF Card) or Drive B (B: Extended Memory Card) if user
area does not have enough space for Project data,
Extended function OS, Option OS, Special data,
Communication driver, and buffering.
(Refer to 3.2. Point)
The total size of the extended function OS, option OS,
special data, and second communication driver or later
must be within the user area size.
An option function board with add-on memory is
necessary if user area does not have enough space for
Project data, Extended function OS, Option OS, Special
data, Communication driver, and buffering.
(Refer to 3.2. Point)
The project data size is up to 3MB.
The project data size is a maximum of 3MB.
The project data size is up to 1.5MB.
The project data size is up to 512KB.
3.2 Precautions for Use
1
2
3
4
5
6
7
37

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric GOT1000 Series

Comments to this Manuals

Symbols: 0
Latest comments: