Mitsubishi Electric GOT1000 Series Handbook page 61

• Whether the expansion memory-attached option function board or CF card is
required or not and the required capacity of expansion memory-attached option
function board or CF card vary depending on the data size.
Select whether to use the expansion memory-attached option function board or
CF card and their capacity using the following flow chart.
Check each size of the following data.
9MB *2
Expansion memory-attached option
Select the expansion memory-attached option
function board whose capacity is larger than
Expansion memory-attached
option function board is not required.
Can be stored in the
built-in flash memory
(Drive C).
CF card is not required.
*3: When the extended function OS and option OS
are stored in the CF card (Drive A), the standard
monitor OS (standard monitor OS, basic font,
first communication driver, etc.) must be stored
also in the CF card (Drive A).
*1: Varies depending on the GOT main unit model.
GT15 -
GT15 -VNB : 53MB
57MB *1
The size is too large. Reduce the
project
unnecessary OS.
function board is required.
- 9MB *2 .
9MB *2
Can be stored in the
built-in flash memory
(Drive C).
CF card is not required.
TB : 57MB
data or delete the
*2: Varies depending on the GOT main unit model.
GT15 - TB : 9MB
GT15 -VNB : 5MB
9MB *2
Can be stored in the
built-in flash memory
(Drive C).
Stored in the CF card
(Drive A or Drive B).
CF card is required.
Select the CF card whose
Select the CF card
capacity is larger than
whose capacity is larger
than .
+ standard monitor OS
(6MB) *3 .
3.2 Precautions for Use
Stored in the CF card
(Drive A).
(Drive B cannot be used.)
CF card is required.
43
1
2
3
4
5
6
7