Mitsubishi Electric GOT1000 Series Handbook page 10

As of February 2008
GOT enhanced by new functions
SFC monitor function
The GOT can monitor a SFC program of a Q series programmable controller CPU with a
SFC diagram, and users can save troubleshooting steps.
Block tabs
Touch a tab to display the
block.
Step
The active step is highlighted.
Touch the step to display the zoom
window. If the block startup step is
touched, then the SFC program of
the relevant block is displayed.
Transition condition
In the device test mode, touching
a transition condition turns on or
off a bit device.
Supporting the device data transfer function
GT SoftGOT1000 supports the device data transfer function.
Expanded manufactures and models of controllers
GT15/GT11/GT10
Programmable controllers (Q13UDHCPU and Q26UDHCPU) are added.
Third party programmable controller
KEYENCE programmable controllers (KV-3000 and KV-5000) are added.
TOSHIBA MACHINE programmable controllers (TC3-01, TC3-02, TC6-00 and TC8-00) are
added.
YASKAWA programmable controller (CP-312) is added.
GT15/GT11
Third party programmable controller
TOSHIBA programmable controller (model 2000 (S2T)) is added.
GT10
Programmable controllers (Q02UCPU, Q03UDCPU, Q04UDHCPU and Q06UDHCPU) are
added.
Expanded option devices
The memory loader for GT10, which allows writing and reading of various data, is added to
option devices.
A
- 8
Switch between the block list, the ladder monitor, etc.
Switch displays
MITSUBISHI Programmable Controller in section 4.1
KEYENCE programmable controller in section 4.3.3
TOSHIBA MACHINE programmable controller in section 4.3.7
YASKAWA programmable controller in section 4.3.13
TOSHIBA programmable controller in section 4.3.6
MITSUBISHI Programmable Controller in section 4.1
SFC
chart
Zoom window
*: Zoom window displayed