Mitsubishi Electric GOT1000 Series Handbook page 69

Graphic operation terminal
Hide thumbs Also See for GOT1000 Series:
Table of Contents

Advertisement

(3) When connecting GT15-SGTKEY-P
(a) Available port for GT15-SGTKEY-P
The GT15-SGTKEY-P can be used with the parallel port mounted on a personal computer
by default.
The GT15-SGTKEY-P is not applicable to parallel ports extended or connected via a
converter.
(b) When using GT15-SGTKEY-P with other devices
The following devices cannot be used at the same port as that for the GT15-SGTKEY-P.
• SCSI interface for parallel port
• Floppy disk drive, hard disk drive, CD-ROM or ZIP drive connected to parallel port
• Devices with data transfer methods that the specifications are out of the standard
specification for the communication method via a parallel port (Interlink network,
Centronics printer interface, and others)
(c) Precautions for connecting GT15-SGTKEY-P
Connect the GT15-SGTKEY-P between the printer switching device and a personal
computer.
(4) When using system driver
Use a system driver included in GT Works2 Version2/GT Designer2 Version2 of Ver 2.25B or
later.
For using a system driver of Ver 2.25B or earlier, though the GT15-SGTKEY-P can be used, the
GT15-SGTKEY-U cannot be used.
3.2 Precautions for Use
1
2
3
4
5
6
7
51

Advertisement

Table of Contents
loading

Table of Contents