Mitsubishi Electric GOT1000 Series Handbook page 185

The GOT model to be used differs depending on the connection type.
Series
RS-232 or RS-422 connections
GT11 Bus connection
Handy GOT RS-232 or RS-422 connections
RS-232 or RS-422 connections
GT105
RS-232 connection
GT10
GT1030
GT1020 RS-422 connection
Precautions
Precautions on system
Clock setting of GOT
The inverter does not have the clock function. Even though [Adjust] or [Broadcast] is set for the clock
setting, the setting is invalid (not processed).
Do not change various communication parameters of the inverter with a GOT.
When the communication parameters of the inverter are changed, the GOT cannot communicate with the
inverter.
Be sure to use GD for the screen switching device and system information device.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking of inverter
connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with Handy GOT
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
Connection type
GT115
GT115
GT115
GT105
GT1030-LBD2/GT1030-LBDW2, GT1020-LBD2/GT1020-LBDW2
GT1030-LBD/GT1030-LBDW, GT1020-LBD/GT1020-LBDW,
GT1020-LBL/GT1020-LBLW
(For GT1020-LBL/GT1020-LBLW, MELSEC-FXCPU connection is available only.)
GOT model to be used
-Q BD
-Q BDQ, GT115 -Q BDA
HS-Q BD
-Q BD
Chapter 37 in GOT1000 Series Connection Manual
(SH-080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 35 in Handy GOT User's Manual
(JY997D20101)
4.2 Other MITSUBISHI controllers
4.2.1 Inverter connection
1
2
3
4
5
6
7
167