Download  Print this page

Mitsubishi Electric GOT1000 Series Handbook Page 211

Graphic operation terminal.
Hide thumbs

Advertisement

Precautions
Precautions on system
When connecting a GOT to the KOYO EI programmable controller, set a terminating resistor for the
programmable controller.
The GOT has a built-in terminating resistor.
Clock setting of GOT
The GOT clock function is available only for the PLC with a calendar function.
Note:Although the "time adjusting" and "time broadcast" functions can be selected on the GOT, the "time
broadcast" function is not available.
Do not select the "time broadcast" function. If both of the functions are selected, not only the "time
broadcast" function but also the "time adjusting" function will be disabled.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking for KOYO EI
programmable controller connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with Handy GOT
*
For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
Chapter 12 in GOT1000 Series Connection Manual
(SH-080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 12 in Handy GOT User's Manual
(JY997D20101)
4.3 Third Party Programmable Controller
4.3.4 KOYO EI programmable controller
1
2
3
4
5
6
7
193

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric GOT1000 Series

Comments to this Manuals

Symbols: 0
Latest comments: