Mitsubishi Electric GOT1000 Series Handbook page 231

The GOT model to be used differs depending on the connection type.
Series
RS-232 or RS-422 connections
GT11 Bus connection
Handy GOT RS-232 or RS-422 connections
Available unit for computer link connection
Unit
Communication Modules
Precautions
Precautions on system
When connecting a GOT to the GE FANUC programmable controller, set a terminating resistor for the
programmable controller.
The GOT has a built-in terminating resistor.
Clock setting of GOT
The PLC clock data cannot be written to or read from the GOT.
The settings of "time adjusting" or "time broadcast" made on the GOT will be disabled on the PLC.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking for GE
FANUC programmable controller connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with Handy GOT
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
Connection type
GT115
GT115
GT115
IC693CMM311
IC697CMM711
GOT model to be used
-Q BD
-Q BDQ, GT115 -Q BDA
HS-Q BD
RS-422
IC693CMM311
IC697CMM711
Chapter 25 in GOT1000 Series Connection Manual
(SH-080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 25 in Handy GOT User's Manual
(JY997D20101)
4.3 Third Party Programmable Controller
4.3.16 GE FANUC programmable controller
RS-232
213
1
2
3
4
5
6
7