Mitsubishi Electric GOT1000 Series Handbook page 174

1. CONNECTION CONFIGURATION
Other precautions
When connecting to motion controller CPU (Q series)
• For Q172CPU or Q173CPU
Use the motion controller CPU with the following production numbers.
Q172CPU with N******* or later, Q173CPU with M******* or later
• For Q172CPU, Q173CPU, Q172CPUN, or Q173CPUN
For using the SV13, SV22, and SV43, use a motion controller with the following OS installed.
SW6RN-SV13Q
For connecting the GOT to the multiple CPU system (Q00CPU, Q01CPU, Q02CPU, Q02HCPU,
Q06HCPU, Q12HCPU, and Q25HCPU), use CPUs with the function version B or later.
When an error related to the network occurs as the system alarm
When an error related to the network occurs as the system alarm with the CC-Link connection (intelligent
device station), the displayed system alarm cannot be erased even though the error factor is removed.
Restart a GOT to erase the system alarm.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking of CC-Link
connection
• For controllers that can be monitored by GOT and
accessible range
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
156
4.1 MITSUBISHI Programmable Controller
4.1.9 CC-Link connection (intelligent device station)
: 00H or later, SW6RN-SV22Q : 00H or later, SW6RN-SV43Q
Chapter 8 in GOT1000 Series Connection Manual (SH-
080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
: 00B or later