Mitsubishi Electric GOT1000 Series Handbook page 228

Series
1769-L31
1769-L32E
CompactLogix series 1769-L32C
1769-L35E
1769-L35CR
1794-L33
FlexLogix series
1794-L34
*1 Connectable to the DH485 network via Adapter (1770-KF3).
*2 The CPU of series C or later is applicable for connecting to the DH485 network. (The DH485 protocol is not
supported for series B or earlier.)
*3 The CPU of series D or later is applicable to the one-on-one connection. (The DF1 half duplex is not supported for
series C or earlier.)
*4 Available only for GT16 and GT15. EtherNet/IP (PCCC protocol) is supported.
The GOT model to be used differs depending on the connection type.
Series
RS-232 or RS-422 connections
GT11 Bus connection
Handy GOT RS-232 or RS-422 connections
RS-232 or RS-422 connections
GT105
RS-232 connection
GT10
GT1030
GT1020 RS-422 connection
Available unit for Ethernet connection
Unit
EtherNet/IP communication module
210
4.3 Third Party Programmable Controller
4.3.15 ALLEN-BRADLEY programmable controller
Computer
link
Model
connection
RS- RS-
422 232
Connection type
GT115
GT115
GT115
GT105
GT1030-LBD2/GT1030-LBDW2, GT1020-LBD2/GT1020-LBDW2
GT1030-LBD/GT1030-LBDW, GT1020-LBD/GT1020-LBDW,
GT1020-LBL/GT1020-LBLW
(For GT1020-LBL/GT1020-LBLW, MELSEC-FXCPU connection is available only.)
1756-ENBT, 1788-ENBT
GT15/GT11
Ether-
Direct CPU
net
connection
(Soon connection
to be
RS- RS-
suppor-
422 232
*4
ted)
GOT model to be used
-Q BD
-Q BDQ, GT115 -Q BDA
HS-Q BD
-Q BD
Model
GT10
Computer
Direct CPU
link
connection
RS- RS- RS- RS-
422 232 422 232
Ether-
net
(Soon
to be
suppor-
*4
ted)