Cc-Link Ie Controller Network Connection - Mitsubishi Electric GOT1000 Series Handbook

1. CONNECTION CONFIGURATION

4.1.8 CC-Link IE controller network connection

System configuration
Target device
QCPU (Q mode)
QSCPU
Motion controller
*2 *3
CPU (Q series)
Optical fiber
*3
CNC C70
*3
CRnQ-700
A
J61QBT1 1
C
Network module
*1: For the system configuration of the target device such as connectable CPU type and version, version restrictions
*2: GT SoftGOT1000 is not available.
*3: Configure the multiple CPU system.
*4: The overall extension cable length and the length between stations differ depending on the cable type to be
Available module
CPU series
MELSEC-Q series (Q mode)
MELSEC-QS series
Precautions
Precautions on system
Applicable range for monitoring
A GOT can only monitor a programmable controller on the network where the GOT is connected. Note
that the routing parameter setting is required when monitoring the programmable controller CPU on the
other network.
When using the QSCPU
The GOT can only read device data and sequence programs by the ladder monitor function in the
QSCPU.
The GOT cannot write any data to the QSCPU.
152
4.1 MITSUBISHI Programmable Controller
4.1.8 CC-Link IE controller network connection
Cable
CC-Link IE
controller network
communication unit
*1
CC-Link IE
controller network
interface board
of the CC-Link IE controller network module, cable, and the number of GOTs connected, refer to CC-Link IE
Controller Network Reference Manual.
used and the total number of stations.
For details, refer to CC-Link IE Controller Network Reference Manual.
Communication unit
GT15-J71GP23-SX
DOS/V personal
Q80BD-J71GP21-SX
Q80BD-J71GP21S-SX
CC-Link IE controller network module
QJ71GP21-SX
QJ71GP21S-SX
GOT
Max. number of
GOTs connected
Max. connection
distance
GT16/GT15
Max. number of
personal
computers
connected
GT SoftGOT1000
+
computer
Max. connection
License key for
distance
GT SoftGOT1000
*1
119
*4
-
*1
120
*4
-