For the cable between the main base unit and extension base unit, refer to Mitsubishi Programmable Logic Controller MELSEC-Q (Catalog) (L(NA)-08033E).

*2:

When the first GOT is installed 13.2m or more away from the main base unit, the bus extension connector box is required.

Without the extension base unit

With the extension base unit

(The bus extension connector box cannot be mounted to the main base unit when a GOT is connected to Q00JCPU.Mount the bus extension connector box to the extension base unit.)

*3:

Select a cable to keep the total cable length between the main base unit of a programmable controller and a terminal GOT within 37m.

*4:

Indication of cable model (example) "GT15-QC B 06:0.6m"

*5:

There are the following restrictions depending on the total cable length when three or more GOTs are connected.

Use the same power supplies of a programmable controller and all GOTs and turn on or off all the power supplies simultaneously.

Number of GOTs

connected

15m or less

2 or less

*6:

Use the GT15-QBUS(2) for mounting the following units. GT15-75QBUS(2)L is not available.

Units for the multimedia function, Video/RGB display, RGB output, printer output, Ethernet download, gateway function, MES interface function, CF card unit, and CF card extension unit

For GT16, however, Ethernet download, gateway function, and MES interface function are available using the Ethernet interface.

*7: The bus connection unit is not required for GT115

4.1 MITSUBISHI Programmable Controller

4.1.3 Details of bus connection

Main base

Extension

unit

base unit

Cable

Max. 13.2m

Bus extension connector box

Main base