Mitsubishi Electric GOT1000 Series Handbook page 68

License key for GT SoftGOT1000
(1) License key
A license key is required for using GT SoftGOT1000.
The license key includes the following two types.
GT15-SGTKEY-P
*1: Not available with the PC CPU module that has no parallel port.
(a) How to use license key
Be sure to connect a license key to the target device before monitoring with GT
SoftGOT1000.
When monitoring is started without the license key, GT SoftGOT1000 automatically ends in
approximately two hours.
Do not remove the license key during monitoring.
When the license key is removed during monitoring, GT SoftGOT1000 automatically ends.
(b) Before connecting license key
The OS recognizes a license key as a controller.
Therefore, install the system driver (device driver) as in the case of the other controllers.
The license key is accessed via the system driver. When the system driver is not installed,
the license key cannot be accessed.
(c) Applicable target of license keys
The GT15-SGTKEY-U and GT15-SGTKEY-P are dedicated to GT SoftGOT1000.
The license keys are not applicable to GT SoftGOT2.
(2) When connecting GT15-SGTKEY-U
(a) Precautions for installing or uninstalling system driver
Remove the GT15-SGTKEY-U before installing or uninstalling the system driver.
When installing the system driver with the GT15-SGTKEY-U connected, the installation of
USB may fails.
When the installation fails, uninstall the system driver with the GT15-SGTKEY-U removed,
and then install the system driver again.
50
3.2 Precautions for Use
Model
GT15-SGTKEY-U
*1
Use the GT15-SGTKEY-U.
Description
For connecting to USB port
For connecting to parallel port