Power Supply Specifications - Mitsubishi Electric GOT1000 Series Handbook

Power supply specifications

Item
GT1585V-STBA
GT1595-XTBA
GT1585-STBA
Input power supply voltage 100 to 240VAC (+10%, -15%)
Input frequency 50/60Hz ±5%
Input maximum apparent power 110VA (at max. load)
Power consumption 56W or less 41W or less
With backlight off 30W or less 28W or less
50A or less 45A or less
Inrush current
(4ms, at max. load) (4ms, at max. load)
Permissible instantaneous
Within 20ms (100VAC or more)
failure time
Noise voltage 1500Vp-p, noise width 1µs
Noise resistance
by noise simulator with noise frequency 25 to 60Hz
1500VAC for 1 minute
Withstand voltage
between power supply terminal and ground
Insulation resistance
Applicable wire size
Clamp terminal
Tightening torque (terminal
block's terminal screws)
Performance specifications
Item
GT1555-VTBD
TFT color LCD
Type
(high-brightness, wide viewing angle)
Screen size
Resolution
VGA: 640 480 [dots]
Display size
16-dot standard font:
40 chars. 30 lines
No. of displayed
(2-byte)
12-dot standard font:
characters
53 chars. 40 lines
Display
(2-byte)
*1
Display colors 65536 colors
Right/left: 80 ,
6
View angle* Up: 80 ,
Down: 70
Contrast adjustment
2
Intensity 350 [cd/m ]
Intensity adjustment
Life
Cold-cathode fluorescent tube (not replaceable), with backlight OFF detection function.
Backlight
Backlight off time and screen save time can be set.
Approx. 75,000 hours or more
2
Life*
(Time for display intensity reaches 50% at operating ambient temperature of 25 C)
Type
1200 keys/screen
No. of touch
(30 lines 40 columns)
keys
Touch
Key size
panel
*7
No. of simultaneous
touch points
Life 1,000,000 times or more (operating force 0.98N or less)
Detection distance
Detection range
Human
Detection delay time
sensor
Detection
temperature
C drive
Memory
*4
Life (No. of writings)
Battery Backed up data Clock data and maintenance time notification data
Life Approx. 5 years (operating ambient temperature: 25 C)
RS-232, 1ch, Transmission speed: 115200/57600/38400/19200/9600/4800bps
RS-232
Application: Communication with connected devices, connection to personal computer
(project data upload/download, OS installation, FA transparent function)
USB (full-speed 12Mbps), device 1ch, Connector shape: TYPE Mini-B
Built-in
USB
interface
(project data upload/download, OS installation, FA transparent function)
Compact flash slot, 1ch, Connector shape: TYPE
CF card
Application: Data transfer, data storage, GOT startup
Optional function board
Extension unit 1ch for communication unit/optional unit installation
Buzzer output
Protective construction
External dimensions
(without USB port cover)
Panel cut dimensions
Weight
(excl. mounting brackets)
Applicable
Screen design software
software
Simulation software
packages
GT1575V-STBA
GT1575-STBA
GT1575-VTBA
GT1585V-STBD
GT1575-VNBA GT1595-XTBD
GT1585-STBD
GT1572-VNBA
GT1565-VTBA
GT1562-VNBA
57W or less
39W or less
(2380mA/24VDC) (1790mA/24VDC)
32W or less
28W or less
(1330mA/24VDC) (1250mA/24VDC)
40A or less 100A or less
(4ms, at max. load) (4ms, at max. load) (1ms, at max. load)
10M or higher with an insulation resistance tester (500VDC between power supply terminal and ground)
Clamp terminals for M3 screw RAV1.25-3, V2-S3.3, V2-N3A, FV2-N3A
Specification
GT1555-QTBD GT1555-QSBD
STN monochrome
STN color LCD
(black/white) LCD
5.7"
QVGA: 320 240 [dots]
115(W) 86(H) [mm]
16-dot standard font: 20 chars. 15 lines (2-byte)
12-dot standard font: 26 chars. 20 lines (2-byte)
4096 colors Monochrome 16 gray scale
Right/left: 70 , Right/left: 55 ,
Up: 70 , Up: 65 ,
Down: 50 Down: 70
–
16-step adjustment
2 2
400 [cd/m ] 380 [cd/m ]
8-step adjustment
Approx. 50,000 hours
(operating ambient temperature: 25 C)
Approx. 58,000 hours or more
Matrix resistive type
300 keys/screen
(15 lines 20 columns)
Min. 16 16 [dots]
(per key)
Max. 2 points
–
–
–
–
9MB built-in flash memory
(for saving project data and OS)
100,000 times
GT15-BAT type lithium battery (optional)
Connector shape: D-sub 9-pin (male)
Application: Connection to personal computer
1ch for optional function board installation
Single tone (tone length adjustable)
5
JEM1030 Front: IP67f* In panel: IP2X
167(W) 135(H) 60(D) [mm]
153(W) 121(H) [mm]
1.1 [kg]
GT Designer2 Version 2.90U or later
GT Simulator2 Version 2.90U or later
Specification
GT1575V-STBD
GT1575-STBD
GT1575-VTBD
GT1575-VNBD
GT1555-VTBD
GT1572-VNBD
GT1565-VTBD
GT1562-VNBD
24VDC (+25%, -20%)
–
–
43W or less 41W or less 19W or less
(1710mA/24VDC) (790mA/24VDC)
30W or less 30W or less
14W or less
(1250mA/24VDC) (580mA/24VDC)
115A or less 115A or less 67A or less
(1ms, at max. load) (1ms, at max. load)
Within 10ms
Noise voltage 500Vp-p, noise width 1µs
by noise simulator with noise frequency 25 to 60Hz
500VDC for 1 minute between power supply terminal and ground
2
0.75 to 2 [mm ]
0.5 to 0.8 [N·m]
*1 : On LCD screens, bright dots (permanently lit) and black dots (not to be lit) generally
appear. Because the large number of display elements exist on an LCD screen, it is
GT1550-QLBD
not possible to reduce appearance of the bright and black dots to zero.
Flickering may occur depending on the display colors.
Note that the existence of bright and black dots is a standard characteristic of LCD
screens, and it does not mean that the products are defective or damaged.
*2 : Using the GOT screen save/backlight OFF functions prevents screen burn-in and
extends the backlight life.
*3 : An analog resistive touch display is used. When 2 points on the screen are touched
simultaneously, if a switch is located the middle of the 2 points then the switch will be
activated. Therefore, avoid touching 2 points on the screen simultaneously.
*4 : The memory is a ROM that permits overwriting of new data without having to delete the
existing data.
*5 : With the USB environmentally protective cover is on, the main unit conforms to IP67f
(JEM1030). (The USB interface conforms to IP2X (JEM1030) when a USB cable is
connected.) However, this does not guarantee protection in all users' environments.
The unit may not be used in an environment where it is exposed to splashing oil or
Right/left: 45 , chemicals for a long time or it is soaked with full of oil mist.
LC panels have characteristics of tone reversal. Note that even within the indicated view
Up: 20 ,
*6 : angles, the screen display may not be clear enough depending on the display color.
Down: 40
The GT1555-VTBD can be operated with a stylus pen.
*7 : Using a stylus pen enables touching small switches without fault.
2
220 [cd/m ]
Use a stylus pen within the following specifications.
• Material: Polyacetal resin
• Point tip radius: 0.8mm or more
GT1550-QLBD
GT1555-QTBD GT1555-QSBD
18W or less 17W or less 15W or less
(750mA/24VDC) (710mA/24VDC) (620mA/24VDC)
13W or less
(540mA/24VDC)
60A or less
(1ms, at max. load)
1.2 Specification
1
2
3
4
5
6
7
11