Mitsubishi Electric GOT1000 Series Handbook page 189

Graphic operation terminal
Hide thumbs Also See for GOT1000 Series:
Table of Contents

Advertisement

Precautions
Precautions on system
The target device of an Ethernet cable differs depending on the Ethernet network system configuration to
be used.
Connect the cable to the system devices, including robot controllers, and hubs, according to the Ethernet
network system to be used.
Communication via network system
A GOT cannot access a programmable controller on other network via a programmable controller (the
network module, Ethernet module, and others) on the network where the GOT is connected.
When connecting multiple network devices (including a GOT) to the same segment
When multiple network devices (including a GOT) are connected to the same segment, the network load
may increase, and the communication speed may slow down between the GOT and a programmable
controller. The following actions can improve the communication performance.
• Use a switching hub.
• Use the high-speed 100BASE-TX (100Mbps).
• Reduce the GOT monitoring points.
Applicable range for monitoring
A GOT can monitor a programmable controller on the network where the GOT is connected and on the
other networks. The routing parameter setting is required when monitoring a programmable controller
CPU on the other networks.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking of Robot
controller connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with GT SoftGOT1000
• For controllers that can be monitored by GT
SoftGOT1000 and accessible range
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
Chapter 39 in GOT1000 Series Connection Manual (SH-
080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 2 in GT SoftGOT1000 Version2 Operating
Manual (SH-080602ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
4.2 Other MITSUBISHI controllers
4.2.3 Robot controller connection
1
2
3
4
5
6
7
171

Advertisement

Table of Contents
loading

Table of Contents