Mitsubishi Electric GOT1000 Series Handbook page 187

Connectable models
MELSERVO-J3 series
MELSERVO-J2-Super series
MELSERVO-J2M series
The GOT model to be used differs depending on the connection type.
Series
RS-232 or RS-422 connections
GT11 Bus connection
Handy GOT RS-232 or RS-422 connections
Precautions
Precautions on system
Clock setting of GOT
The servo amplifier does not have the clock function. Even though [Adjust] or [Broadcast] is set for the
clock setting, the setting is invalid (not processed).
Other precautions
Test operation of servo amplifier with GOT
When communication between a GOT and a servo amplifier is aborted for 0.5[ms] or more during the test
operation of the servo amplifier, the servo amplifier makes the servo motor decelerate and stop, and then
the servo motor locks.
During the test operation of the servo amplifier, keep the communication between the GOT and servo
amplifier executed with monitoring the servo amplifier status and others.
Related Manuals
• For details of system configuration and connection
cable
• For precautions and restrictions
• For outlined procedure and checking of servo
amplifier connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with Handy GOT
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
Model
MR-J3 A
MR-J3 T
MR-J2S- A
MR-J2S- CP
MR-J2M-P8A
MR-J2M DU
Connection type
GT115
GT115
GT115
RS-422
GOT model to be used
-Q BD
-Q BDQ, GT115 -Q BDA
HS-Q BD
Chapter 38 in GOT1000 Series Connection Manual
(SH-080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 36 in Handy GOT User's Manual
(JY997D20101)
4.2 Other MITSUBISHI controllers
4.2.2 Servo amplifier connection
1
RS-232
2
3
4
5
6
7
169