28 April 2005
DRUM AND DEVELOPMENT UNIT
3.5.6 DRUM UNIT, ID SENSOR, AND CLEANING BLADE
[A]
[B]
[E]
[C]
[D]
B188R940.WMF
Development unit (☛ 3.5.2)
To the right of the drum drive gear, loosen the screw to relieve the tension on the
drive belt.
[A]: Drum drive gear and belt (! x1, use a hex wrench)
[B]: ID sensor connector (" x 1)
[C]: Left drum bracket (! x 2)
[D]: Right drum bracket (! x 2)
[E]: OPC drum assembly
NOTE: Cover the OPC with a sheet of paper to protect it from light.
Important: Never touch the surface of the drum.
3-25