Oil Pressure Check; Oil And Filter Replacement - Toyota 1HD-FT Repair Manual

EG
EG-193
ENGINE LUBRICATION SYSTEM
-
Recommended Viscosity (SAE) :
OIL PRESSURE CHECK
--.
I. CHECK ENGINE OIL QUALITY
,
Check the oil for deterioration. entry of water, dis-
I II I
I
coloring or
If the quality is visibly poor, replace the oil.
III
Oil grade:
"~
.
" .,
•
" " •
API grade CD or bener
,.~
•
~
e m m
,m
TDll'£I\ATUlE IWlOE ANTlCPATtO
Recommended viscosity:
Ilf.roAE
,.EXT
01.
c:w.NGE
"=
Oil Pressure Gauge
"
R.f., to Illustration
2. CHECK ENGINE OIL LEVEL
The oil level should be between the "L- and '"F- marks
on the dipstick.
If low. check for leakage and add oil up to "F" mark.
3. REMOVE OIL PRESSURE SENDER GAUGE
4. INSTALL OIL PRESSURE GAUGE
5. WARM UP ENGINE
Allow the engine to warm up to normal operating
temperature.
6. CHECK OIL PRESSURE
Oil pr...ura:
At idle
29 kP. (0.3 kgf/cm'. 4.3 psi) or more
At 3.000
rpm
250 - 600 kP.
(2.5 - 6.1 kgf/cm l
,
38 - 87 pai)
7. REMOVE OIL PRESSURE GAUGE
Adhesive
8. REINSTALL OIL PRESSURE SENDER GAUGE
(a)
Apply
adhesive to 2 or 3 threads of the oil pressure
sender gauge.
Adhesive:
Part No. 08833-00080. THREE BOND 1344.
LOCTITE 242 or equivalent
(b) Install the oil pressure sender gauge.
9. START ENGINE. AND CHECK FOR OIL LEAKS
OIL AND FILTER REPLACEMENT
CAUTION:
--.
• Prolonged and reputed contact with mineral oil will
re.ult in the remonl of natural fat. from the skin.
le.ding to dryn.... irritation and dermatitis. In addi-
tion. u••d engine oil contain. potentially harmful
contaminant. which may cause .kin cancer.