Oil Pressure Check; Check Engine Oil Quality; Check Engine Oil Level; Measure Oil Pressure - Toyota 7M-GE Repair Manual

rutmwCiA
rlON SYSTEM - Oil Pressure 'f,",; .! . ,_ _,, __ _ ,-tiu,e
Recommended
Viscositv (SAE):
I 1 1 1 h
T-29
-,a 7
"F-20
0
TEMPEAATURE
LY
I I b
I I I I
I
z
4 16
36
/
RANGE ANTICIPA$O B&i% NEXT OIL CHANGE
100
._. .-- . . .
OIL
. .._. -. - -_-. _ . _ _.. _ _...
1.
1
CHECK-ENGINE OIL QUALITY
Check the oil for deterioration, entry of water, discoloring .
or thinning.
2.
3.
4.
5.
6.
If oil quality is poor, replace the oil,
Europe ('IM-GE) and Australia *
Use API grade SE, SF or better and recommended
viscosity oil.
Europe (7M-GTE)
Use API grade SF or better and recommended
viscosity oil.
Others
Use API grade SC, SD, SE, SF or better and recom-
mended viscosity oil.
CHECK ENGINE OIL LEVEL
The oil level should be between the "L" and "F" marks on
the dipstick.
If low, check for leakage and add oil up to the "F" mark.
REMOVE OIL PRESSURE SENDER GAUGE
INSTALL OIL PRESSURE GAUGE
START ENGINE
Start engine and warm it up to normal operating tem-
perature.
MEASURE OIL PRESSURE
Oil pressure:
At idle 0.3 kg/cm2 (4.3 psi, 29 kPa1
or more
At 3,000 rpm 2.5 - 5.0 kg/cm
(36 - 71 psi, 245 - 490 kPa1
NOTE: Check for oil leakage after reinstalling the oil
pressure sender gauge.