Toyota 1HD-FT Repair Manual page 192

ENGINE - COOLING SYSTEM
EG-179
2. FILL ENGINE COOLANT
(a)
Slowly fill the system with coolant.
• Use a good brand of ethylene-glycol base cool·
ant and mix it according to the manufacturer's
directions.
• Using coolant which includes more than 50 %
ethylene-glycol (but not more than 70
%)
is
recommended. El
NOTICE,
• Do not us. an alcohol type coolant.
• Th. coolant should be mixed with demineralized
wat.r or di.tilled wat.r.
Capacity:
wI
Front and r••r h ••
t.,.
MIT
12.0 lit.,. (12.7 US
qt..
to.7Imp.
qt.)
AIT
11.8 lit.,. ('2.5 US
qt•• ,
0.4 Imp. qtl)
w/ Front h••t.r
MIT
11.1 Iita" (".7 US
qt••
9.8 Imp.
qt.)
AIT
10.9
lit.,.
(11.5 US
qt..
9.6 Imp.
qt.)
w/o
H••
t.r
MIT
10." lit.r. (11.0 US
qt••
9.2 Imp.
qt.)
AIT
10.2 Iiten (11.1 US
qt••
9.0 Imp.
qt.)
(b) Install the radiator cap.
(e) Start the engine. and bleed the cooling system.
(d) Refill the radiator reservoir with coolant until it rea-
ches the '"FULL'" line.
3. CHECK ENGINE COOLANT FOR LEAKS