Toyota 1HD-FT Repair Manual page 70

ENGINE - ENGINE MECHANICAL
EG-57
Seal Packing
(d) Using a plastic-faced hammer. lightly tap the valve
stem
tip
to assure a proper fit.
2. INSTALL VALVE BRIDGES
(a) Install the valve bridge.
(b) Check that the valve bridge rotates smoothly.
3. INSTALL WATER TEMPERATURE SENDER GAUGE
(a) Apply seal packing to 2 or 3 threads.
S••I packing:
Part No. 08826 - 00100 or equivalent
(b) Install the sender gauge.
EG