Table of Contents
Advertisement
CH·10
CHARGING SYSTEM - ALTERNATOR
Bearings
(c)
Check that one shows continuity and the other shows
no continuity.
If continuity is not as specified. replace the rectifier
holder.
1.
INSPECT FRONT BEARING
Check that the bearing is not rough or worn.
CH
2.
IF NECESSARY. REPLACE FRONT BEARING
(a)
Remove the 4 screws, bearing retainer and bearing.
(b)
Using SST and a press. press out the bearing.
SST 09950-60010 (09951-00260. 09952-06010)
(e)
Using SST and a press. press in a new bearing.
SST 09950-60010 (09951-00500)
(d)
Install the bearing retainer with the 4 screws.
3.
INSPECT REAR BEARING
Check that the bearing is not rough or worn .
....
Hide quick links:
Advertisement
Table of Contents
