Toyota 1HD-FT Repair Manual page 251

CH-6
CHARGING SYSTEM - ALTERNATOR
:H
~,
(b) Remove the 3 nuts, bolt and plate terminal.
(e) Remove the rear end covsr.
2. REMOVE BRUSH HOLDER AND IC REGULATOR
(a) Remove the brush holder cover from the brush holder.
(b)
Remove the 5 screws, brush holder and Ie regulator.
(e) Remove the seal plate from the rectifier end frame.
3. REMOVE RECTIFIER HOLDER
(a) Remove the 4 screws and rectifier holder.