Toyota 1HD-FT Repair Manual page 154

ENGINE - FUEL SYSTEM
EG-141
4.
INSTALL DRIVE SHAFT
Joint Rubber
(al
Install the drive gear on the drive shaft assembly as
«'i~
•
Drive Gear
shown.
o~~y
(b)
Install 2 new joint rubbers into the drive gear.
1~~
~
Drive Shaft Assembly
""ro
EG
(e) Position the key groove of the feed pump rotor
upward.
Drive Shaft
Washer
Sel Key
(d) Install the drive shaft washer and set key on the drive
shaft and insert the drive shaft assembly into the
pump housing.
(8)
Check that the drive shaft turns without catching.
5. INSTALL TIMER PISTON
(a)
Apply
grease to the timer piston.
(b) Install the sub-piston into the timer piston.
(el Insert the timer piston into the pump housing.