Download  Print this page

Crankshaft Front Oil Seal Replacement; Injection Pump Drive Gear Oil Seal Replacement - Toyota 1HD-FT Repair Manual

Hide thumbs

Advertisement

Table of Contents
EG-34
ENGINE - ENGINE MECHANICAL
--.
CRANKSHAFT FRONT OIL SEAL
REPLACEMENT
HINT: There are 2 methods (A and B) to replace the oil
seal as follows:
REPLACE CRANKSHAFT FRONT OIL SEAL
A.
If timing geer cover i' removed from cylinder block:
(a)
Using a screwdriver and hammer. tap out the oil s8al.
(b)
Using SST and a hammer. tap in a new oil seal until its
surface is flush with the timing gear cover edge.
SST
09223-78010
(e)
Apply MP grease to the oil seal lip.
B.
If timing ge.r cover i, in,talled to the cylinder block:
(a)
Using SST. remove the oil seal.
SST
09308-10010.09950-50010
(09953-050101
(b)
Apply MP grease to a new oil seal lip.
Ie)
Using SST and a hammer. tap in the oil seal until its
surface is flush with the timing gear cover edge.
SST
09223-78010
--
INJECTION PUMP DRIVE GEAR OIL SEAL
REPLACEMENT
HINT: There are 2 methods (A and B) to replace the oil
seal as follows:
REPLACE INJECTION PUMP DRIVE GEAR OIL SEAL
A.
If timing geer cover
i.
removed from cylinder block:
(a)
Using a screwdriver and hammer. tap out the oil seal.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments:
  • Dibakar Kundu Aug 13, 2019 04:39:
    much helf full to us,we hope will get this type of support in future.