Download  Print this page

Starter Relay Inspection - Toyota 1HD-FT Repair Manual

Hide thumbs

Advertisement

Table of Contents
ST-18
STARTING SYSTEM - STARTER RELAY
3.
INSPECT CLUTCH PINION GEAR RETURN
Disconnect the negative (-) lead from the switch
body.
Check that the clutch pinion gear returns inward.
If the clutch pinion gear does not return, replace the
magnetic switch assembly.
4.
00 NO- LOAD PERFORMANCE TEST
(a)
Connect the battery and ammeter to the starter as
shown.
(b) Check that the starter rotates smoothly and steadily
with the pinion gear moving out. Check that the am·
meter shows the specified current.
Specified current:
12 V
type:
At 11.0 V: 180 A
or I...
24 V
type:
At 23.0 V: 90 A or I...
wl24V Starter
STARTER RELAY
STARTER RELAY INSPECTION
1.
REMOVE STARTER RELAY
.....
-
. .
wI 12 V Starter
, - - ,
4
1
Ohmmeter
=
oj3F.::~
2.
INSPECT STARTER RELAY
A.
Inapect relay continuity
wI
12 V St.rter:
(a)
Using an ohmmeter. check that there is continuity
between terminals 3 and 4.
(b)
Check that there is no continuity between terminals 1
and 2.
If continuity is not as specified. replace the relay.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments:
  • Dibakar Kundu Aug 13, 2019 04:39:
    much helf full to us,we hope will get this type of support in future.