ENGINE - ENGINE MECHANICAL
EG-27
10. INSTALL TIMING BELT COVER
(a)
Remove any old packing (FIPG) material.
(b)
Apply
s8al packing to the camshaft oil seal retainer
and timing gear cover as shown in the illustration.
S. .I JNIcking:
Pert No. 08826-00080 or equivelent
(0)
Install the insulator to the timing gear cover.
(d)
Install the gasket to the timing belt cover.
(el
Install the timing belt cover with the 3 seal washers.
3 bolts and 3 clips.
(f)
Install the vacuum hose to the 2 clamps on the timing
belt cover.