Toyota 1HD-FT Repair Manual page 144

ENGINE - FUEL SYSTEM
EG-131
(d) Australia:
Disconnect the speed control spring from the spring
seat. and remove the spring seat, damper spring,
speed control spring. the governor cover. adjusting
lever shaft assembly and gasket.
(c) Europe:
Disconnect the adjusting lever shaft assembly from
the governor link, and remove the governor cover and
gasket.
215519
W:618
--
Europe
FU2~2
Australia
15. REMOVE GOVERNOR ADJUSTING LEVER SHAFT
FROM GOVERNOR COVER
(a) Remove the adjusting lever shaft assembly from the
governor cover.
(b) Disassemble these parts:
(1)
O-ring
(2) Washer
16. DiSASSEMBLE BOOST COMPENSATOR
A. Remove lever control spring
Remove the bolt. gasket and lever control spring.
5mm
Hexagon
Wrench
B. Remove boost compensator diaphragm
(a) Using a 5 mm hexagon wrench, remove the 4 bolts.