Toyota 1HD-FT Repair Manual page 155

EG·142
ENGINE - FUEL SYSTEM
Slide Pin
o . .
~
"--===:.--C/
~
6. INSTALL ROLLER RING
(a) Install the slide pin. 4 rollers and 4 washers on the
roller ring.
(b) Check that the roller is facing the flat surface of the
washer.
(c) Install the roller ring into the pump housing.
(d) Carefully install the slide pin into the sub-piston.
(e) Install the stopper pin and clip.
7. INSTALL TIMER SPRING
(a)
Install a new a-ring to the timer adjusting screw.
(b) Using a 5 mm hexagon wrench. install the timer ad-
justing screw to the LH timer cover and temporarily
install the nut.
l~1f
(6) (4)
(e)
Install these parts:
(1) NewO-ring
(2) RH timer cover
(3) Inner spring
(4) Outer spring
(5) Shim
(6) New O-ring
(7) LH timer cover, timer adjusting screw and nut
assembly