tep 8 in cylinder he.d removel in Engine
REMOVE OIL PUMP (TIMING GEAR CASE)
Remove the 2 nuts holding the injection pump to the
timing gear case.
Remove the 7 bolts holding the timing gear case to
the cylinder block.
Using a screwdriver. remove the oil pump by prying
the portions between the oil pump and cylinder block.
Remove the gasket and O-ring.
REMOVE OIL STRAINER
Remove the 2 bolts. 2 nuts. oil strainer and gasket.
ENGINE - LU8RICATION SYSTEM
REMOVE WATER OUTLET
COMPONENTS FOR DISASSEMBLY AND--
J1. . · ··
Timing Gear Case
• Non-reusable part