Subaru 2009 IMPREZA Service Manual page 1001

FUEL INJECTION (FUEL SYSTEMS)
28.Fuel Sub Level Sensor
A: REMOVAL
WARNING:
Place "NO OPEN FLAMES" signs near the
working area.
CAUTION:
• Be careful not to spill fuel.
• If the fuel gauge indicates that two thirds or
more of the fuel is remaining, be sure to drain
fuel before starting work to avoid the fuel to
spill.
1) Release the fuel
FU(H4DOTC)-60, RELEASING OF FUEL PRES-
SURE, PROCEDURE, Fuel.>
2) Drain fuel. <Ref. to FU(H4DOTC)-60, DRAIN-
ING FUEL (WITH SUBARU SELECT MONITOR),
PROCEDURE, Fuel.>
3) Disconnect the ground cable from battery.
4) Remove the rear seat cushion. <Ref. to SE-11,
REMOVAL, Rear Seat.>
5) Remove the service hole cover.
Fuel Sub Level Sensor
pressure. <Ref. to
IN-00203
FU-03355
FU(H4DOTC)-76
6) Disconnect the connector from the fuel sub level
sensor.
7) Disconnect the quick connectors of fuel delivery
tube (A), fuel return tube (B), and jet pump tube (C).
<Ref. to FU(H4DOTC)-84, REMOVAL, Fuel Deliv-
ery, Return and Evaporation Lines.>
8) Remove the rubber cap (D) from the nut.
(C)
9) Remove the bolts and nuts which hold fuel sub
level sensor to the fuel tank.
10) Remove the fuel sub level sensor.
FU-03364
(B)
(A)
(D)
FU-04239
FU-01146
FU-04240