4.
ADJUSTMENT
4-1.
ADJUSTMENT JIGS AND TOOLS USED
<Scanner/Mirrors Carriage Positioning Jigs>
4022D010AA
<Db Gap Adjusting Jigs>
4022D012AA
4-2.
TIMING BELT TENSION ADJUSTMENT
<Scanner Motor Timing Belt Adjustment>
4022D032AA
<Ds Collar Positioning Jigs>
<PC Positioning Jig>
1. Loosen three screws and move the Scanner
Motor Assy to the right or left to give tension to
the spring.
NOTE
• Give tension to the spring with the pulley in correct
mesh with the timing belt.
2. Using a torque driver, tighten the screws to a
torque of 2 kg⋅cm.
D-51
4022D011AA
4022D030AA