Dexcom G4 Professional User Manual page 53

5
(1) Press the
enter the transmitter ID.
(2) Press the
button to move to the next space.
(3) Press the
you enter the last number or letter
to confirm the transmitter ID.
The transmitter ID is a unique code with 5 numbers and/or letters found
in the following locations:
• On the transmitter box label
• On the bottom of the transmitter
c. Set the low and high glucose alert values appropriate for each
individual patient. The low and high glucose alerts are pre-set to 80
mg/dL and 200 mg/dL but can be changed.
Low Alert setting screen
NOTE: Even though alerts and alarm for low or high glucose levels
are inactive in blinded mode, you must set the low and high alert
levels as part of the Setup Wizard process in order to proceed.
52 | Dexcom G4 PLATINUM Professional Continuous Glucose Monitoring System
UP DOWN
or button to
RIGHT or SELECT
SELECT button after
Transmitter ID setting screen
High Alert setting screen