Dexcom G4 Professional User Manual page 158

11. Place the transmitter on a clean
non-porous surface and allow the
disinfectant to contact it for one
minute.
12. Place the transmitter in the Clorox
Healthcare Bleach Germicidal
Cleaner spray solution for one minute.
13. Remove the transmitter and rinse
it under flowing tap water for ten
seconds.
14. Wipe the transmitter with a low lint, absorbent cloth until it is
completely dry.
After cleaning and disinfection, remove and discard gloves, and wash
hands thoroughly with soap and water.
Clorox Healthcare Bleach Germicidal Cleaner (EPA registration number
56392-7) and Dispatch Hospital Cleaner Disinfectant Towels with Bleach
Dexcom G4 PLATINUM Professional System User's Guide
Step 11. Place transmitter
on clean surface
Step 12. Place transmitter
in solution
Step 13. Rinse transmitter
under flowing water
| 157