Dexcom G4 Professional User Manual page 157

12
2. Prepare a soaking container by adding enough Clorox Healthcare
Bleach Germicidal Cleaner to submerge a transmitter.
3. Place the transmitter with the contact (metal circles) side down on an
absorbent wipe or clean surface.
4. Remove a pre-saturated Dispatch Hospital Cleaner Disinfectant Towel
with Bleach from its packaging.
5. Fold the Dispatch Hospital Cleaner Disinfectant Towel with Bleach into
a 2 x 2 inch square.
6. Wipe all surfaces of the transmitter by
passing over the transmitter surface
in one direction and then back in the
opposite direction (back and forth
means two passes).
7. Turn over the Dispatch Hospital Cleaner Disinfectant Towel with
Bleach to use a clean side for a second back and forth wipe.
8. Refold the Dispatch Hospital Cleaner Disinfectant Towel with Bleach
to use a clean side for a third back and forth wipe.
9. Turn over the Dispatch Hospital Cleaner Disinfectant Towel with
Bleach to use a clean side for a fourth back and forth wipe.
10. Keep track to be sure you wiped four times back and forth for a total
of eight passes and that all transmitter surfaces are covered with
disinfectant.
156 | Dexcom G4 PLATINUM Professional Continuous Glucose Monitoring System
Step 6. Wipe transmitter
back and forth