Downloading The Receiver; Resetting The Receiver For Multiple Patient Use - Dexcom G4 Professional User Manual

NOTE: The choice of blinding/unblinding the receiver does not impact
the data that is downloaded from the receiver. It does impact whether
the data will be visible in charts/reports after downloading.

10.2.3 DOWNLOADING THE RECEIVER

You will need the USB to Micro USB cable
provided with the Dexcom G4 PLATINUM
Professional System to connect the receiver to
the PC.
USB to Micro USB cable
Before downloading the receiver, remove the receiver shield from the
receiver to help reduce the spread of contamination.
1. Slide open the USB port cover on the side of the receiver.
2. Plug the Micro USB end of the cable into the receiver USB port.
3. Connect the other end of the cable into any free USB port on the PC.
The software will first try to assign the new receiver download to an
existing patient record (using this same receiver). If it does not find
a match, the Edit Patient pop-up window will appear where you can
create a new patient record for this download. See the Dexcom STUDIO
Software User's Guide, Section 5, Patient Management, for editing
patient record information.
10.2.4 RESETTING THE RECEIVER FOR
MULTIPLE PATIENT USE
A useful feature for healthcare professionals is to be able to reset
the receiver database. Resetting will erase all data from the receiver
database, and set the receiver time and date to the Internet time and
date. The transmitter ID and blind/unblind settings in the receiver will be
preserved. The receiver must be attached to the PC and the Dexcom
Dexcom G4 PLATINUM Professional System User's Guide | 137