Dexcom G4 Professional User Manual page 75

6
2. From any trend graph, press the
Menu.
3. Press the DOWN
Sensor."
• The "Start Sensor" menu option will
disappear from the Main Menu after you
select it. The option will only come back
after an active sensor session ends. If you
do not see the "Start Sensor" option on
the menu screen, you can continue the
current session or stop the session (refer
to Chapter 13, Section 13.6, Sensor Shut-off Troubleshooting).
4. Press the SELECT button to confirm the
start of a new sensor session. The Start
Sensor "thinking" screen lets you know the
sensor 2-hour startup has begun.
5. The receiver returns to the 3-hour trend graph.
6. Check the receiver 10 minutes after starting the sensor session to
make sure the receiver and transmitter are communicating. The
antenna symbol
If the out of range symbol
trend graph, see Chapter 13, Section 13.9, Out of Range/No Antenna.
74 | Dexcom G4 PLATINUM Professional Continuous Glucose Monitoring System
SELECT
button to highlight "Start
should be in the upper left corner of trend graph.
shows in the upper right corner of the
button to see the Main
Main Menu,
Start Sensor highlighted
Start Sensor
"thinking" screen