Glucose Status Area Symbols In Both Real-Time And Blinded; Modes - Dexcom G4 Professional User Manual

8
WARNING
Do not ignore symptoms of high and low glucose. If your
sensor glucose readings do not match your symptoms,
measure your blood glucose with a blood glucose meter
even if your sensor is not reading in the high or low
range, so you do not miss a low or high blood glucose
value.
8.3 GLUCOSE STATUS AREA SYMBOLS IN
BOTH REAL-TIME AND BLINDED MODES
The "status area" at the top of the trend graph may show any of the
status symbols below during the sensor session. You will not get sensor
glucose readings during the time a status symbol shows except during
the regular 12-hour calibration prompt or if the receiver is in blinded
mode. See Chapter 8, Section 8.1, Sensor Glucose Readings in
Real-Time Mode, for receiver display status area.
Status Symbols
This symbol means you need to enter a calibration. This prompt will
show when it is time for the 12-hour calibration update or any other time
an additional calibration is needed (see Chapter 7, Section 7.2, How to
Calibration
Calibrate).
Needed
Additional
This symbol means you need to enter one more blood glucose value in
Startup
order to calibrate the system and start getting sensor glucose readings.
Calibration
Needed
100 | Dexcom G4 PLATINUM Professional Continuous Glucose Monitoring System
(continued on next page)