Dexcom G4 Professional User Manual page 143

11
6-hour Replace Sensor 2-hour Replace Sensor
30-minute Replace Sensor Replace Sensor
end of session
You can set these alerts with the profiles setting (see Chapter 9, Section
9.3.2, Alert Profile Details, "All Other Alerts"). After the 6-hour, 2-hour,
and 30-minute reminders, you continue to receive sensor glucose
readings. Press SELECT to clear these screens. You must remove the
sensor after the Replace Sensor Now screen (00:00:00) shows.
Sensor glucose readings do not show
on the receiver after the sensor session
ends. The trend graphs show that the
sensor session has ended with a red
stoplight symbol at the top.
You must remove the sensor based on the
instructions of your healthcare professional
(i.e., the healthcare professional will tell you
Trend graph with
if you should remove the sensor yourself or
red stoplight in upper right
return to the healthcare professional's office
to remove the sensor).
142 | Dexcom G4 PLATINUM Professional Continuous Glucose Monitoring System