Servicing Mechanical Components - Xerox Phaser 6300 Service Manual

Color laser printer

Hide thumbs Also See for Phaser 6300:

Table of Contents

Servicing Electrical Components

Before starting any service procedure, switch off the printer power and unplug the

power cord from the wall outlet. If you must service the printer with power applied,

be aware of the potential for electrical shock.

Do not touch any electrical component unless you are instructed to do so by a

service procedure.

Servicing Mechanical Components

When servicing mechanical components within the printer, manually rotate drive

assemblies, rollers, and gears.

Do not try to manually rotate or manually stop the drive assemblies while any

printer motor is running.

Servicing Fuser Components

This printer uses heat to fuse the toner image to media. The Fuser is VERY HOT.

Turn the printer power off and wait at least 5 minutes for the Fuser to cool before

you attempt to service the Fuser or adjacent components.

Phaser 6300/6350 Color Laser Printer Service Manual