Eeprom Board (Pl9.1.12) - Xerox Phaser 6300 Service Manual

EEPROM Board (PL9.1.12)

1.
Remove the Top Main Cover (page 8-8).
2.
Remove the Right Side Cover (page 8-12).
3. Remove the 4 clamps that hold the harness in the Rear Harness Guide and
remove the harness.
4.
Remove the 2 screws (self-tapping, plastic 10 mm) that secure the Rear Harness
Guide.
5.
Unplug connector (P/J144) from the EEPROM Board.
6. Remove the screw (self-tapping, plastic 10 mm) that secures the EEPROM Board
and remove.
Service Parts Disassembly
EEPROM Board
P/J144
Clamps
Rear Harness Guide
s6300-217
8-103