Right Feeder Assemblies (Pl12.2.4) - Xerox Phaser 6300 Service Manual

Right Feeder Assemblies (PL12.2.4)

Caution
Move the sensor flags upwards before attempting to remove the feeders.
1.
Remove the Front Covers (page 8-111).
2.
Remove the Right Cover (page 8-113).
3. Remove the Feeder Chute (page 8-115).
4. Remove the Tray Rear Cover (page 8-22).
Note
Perform Step 5 only when removing the upper Right Feeder Assembly.
5.
Remove the Drive Assembly (page 8-121).
6.
Remove the Paper Size Switch connector (P/J821).
7.
Remove 6 screws (self-tapping, plastic 8 mm) that secure the Right Feeder.
8. Tilt the Right Feeder Assembly and remove it from the front.
Right Feeder Assembly
Replacement Note
Replace the Upper Right Feeder before replacing the Drive Motor.
Service Parts Disassembly
s6300-255
8-117