OPTFDR 2 Harness (PL12.3.1)
1.
Seperate the 1100-Sheet Feeder from the printer (page 8-110).
2.
Remove the Front Covers (page 8-111).
3.
Remove the Right Cover (page 8-113).
4.
Remove connector (P/J83) on the upper Circuit Board HCF.
5.
Remove the OPTFDR 2 Harness from clamps.
6.
Release two hooks that secure (J172), and remove OPTFDR 2 Harness.
Service Parts Disassembly
s6300-258
8-119