Xerox Phaser 6300 Service Manual page 535

Service Diagnostics Tests and Utilities (Continued)
Test
Rear Fan
Fuser Fan
Sensor/Switch Tests - Tests the functionality of the sensors and switches.
Interlock Switch
Registration Sensor Sensor is Off
Exit Sensor
Duplex Sensor
Full Stack Sensor
[Y][M][C][K] Toner
Low
[Y][M][C][K] Toner
Cartridge Present
[Y][M][C][K] CRUM
Sensor
Tray [2] [3] [4] [5]
Low Paper Sensor
A-14
Control Panel Display and Test Definition
High Speed
Low Speed
High Speed Continuous
Low Speed Continuous
High Speed
Low Speed
High Speed Continuous
Low Speed Continuous
Sensor is On
Sensor is Off
Sensor is On
Sensor is Off
Sensor is On
Sensor is Off
Sensor is On
Sensor is Off
Sensor is On
Toner is Low
Toner is NOT Low
Sensor is Off
Sensor is On
Sensor is Off
Sensor is On
Size: XXXX
Paper is Not Low
Paper is Low
Phaser 6300/6350 Color Laser Printer Service Manual
Audible verification of motor
function.
Check for airflow.
Audible verification of motor
functionality.
Check for airflow.
Door A or B is open
Door A or B is closed
This test continuously cycles
paper. The sensor state changes
as paper passes the sensor.
NOTE: This test can also be used
as a paper path transport
test when troubleshooting
Jam conditions.
Move the Exit Actuator (PL5.1.2) to
toggle the sensor state.
Move the Duplex Jam Actuator
(PL5.4.13) to toggle the sensor.
Move the Full Stack Actuator
(PL5.4.2) to toggle the sensor.
Displays current state of the
sensor.
Move the Toner Cartridge In switch
(PL7.2.7) to change the sensor.
Toner Cartridge is LOCKED.
Toner Cartridge is UNLOCKED.
Move the Toner Cartridge In switch
(PL7.2.7) to change the sensor.
Toner Cartridge is LOCKED.
Toner Cartridge is UNLOCKED.
Move the Tray Rear Guide or
maunally toggle the Paper Size
Switch Acutators to the desired
paper size and verify the sensor
output.
Fill tray with paper to the fill line.
Insert one sheet of paper in tray to
change the sensor.