Print-Quality Troubleshooting; Light Prints - Xerox Phaser 6300 Service Manual

Print-Quality Troubleshooting

Light Prints

The overall image density is too light.
Initial Actions
Verify the media used is supported by this printer.
Verify the media settings are correct at the Control Panel.
Run the color calibration routine prior to using this troubleshooting
procedure.
Troubleshooting Reference Table
Applicable Parts
Imaging Unit, PL6.1.1
Developer Assemblies, PL7.1.17~20
Laser Unit, PL6.1.2
Transfer Roller, PL5.1.4
HVPS, PL9.1.21
Engine Control Board, PL9.1.16
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the Imaging Unit and Transfer
Roller for correct installation, damage,
contamination, and life remaining.
2 Replace the Imaging Unit (page 8-5).
Does the image quality improve?
3 Replace the Transfer Roller
(page 8-5).
Does the image quality improve?
5-10
Example Print
Phaser 6300/6350 Color Laser Printer Service Manual
Yes
Replace or reinstall
the affected
component.
Complete
Complete
s6300-108
No
Go to Step 2.
Go to Step 3.
Go to Step 4.